
Resin-bound driveway
A finished resin-bound surface at a residential property.
Delivered by Hinchliffe Surfacing Ltd
TARSPRA Residential / Resin bound
Seamless Daltex aggregate finishes mixed with UV-stable polyurethane resin. The surface is only permeable if what sits beneath it drains, so the build-up is designed first.

A finished resin-bound surface at a residential property.
Delivered by Hinchliffe Surfacing Ltd
Illustrative sequence. Depths and materials are confirmed in your written specification after assessment.
01
Remove unsuitable ground to formation and dispose of spoil.
02
Compacted, free-draining aggregate sized to vehicle use.
03
Porous asphalt or suitable base to carry the resin layer.
04
Hand-trowelled Daltex aggregate and UV-stable resin.
Driveway investment guide
An immediate guide including 20% VAT. Resin rates reduce with project size. Your measured proposal confirms the construction, quantities and exclusions.
This guide covers full build-up only. Ask Dan to assess whether your existing base can be retained.
Retaining walls over 600mm: site-assessed and quoted separately.
42 m² · Full build-up
£13,305.60
Including 20% VAT · indicative, not a fixed quotation
Abnormal ground, utilities, access and drainage discharge may change the proposal. Permeability depends on the complete pavement design. Installation deposit: £600 including VAT, payable only under agreed terms; no payment or booking is taken here.
Only where the existing base is sound, drains and suits threshold heights. Dan assesses this on site; see our overlay guide.
The resin layer is porous. Permeability of the whole driveway depends on a porous base and suitable ground beneath it.
Residential & commercial