TARSPRA / 2026 price guide
What does a driveway cost in Cheshire?
Compare the measured scope, not just the surface rate. These are TARSPRA’s supplied guide rates, including 20% VAT, not a market average or fixed quotation.
Know what the guide includes.
Resin rates reduce with project size; the relevant band applies to the full measured area. The driveway minimum is £6,000 including VAT before selected extras. Abnormal ground, utilities, access restrictions and drainage discharge can change the assessed proposal.
Surface rates including VAT
- Resin below 30 m²
- £369.60/m²
- Resin 30–59.99 m²
- £316.80/m²
- Resin 60–99.99 m²
- £290.40/m²
- Resin 100 m²+
- £264.00/m²
- Tarmac full build-up
- £168.00/m²
- Tarmac assessed retained base
- £120.00/m²
- Block paving
- £198.00/m²
A 42 m² resin example
At the 30 m²+ resin band, 42 m² × £316.80 gives £13,305.60 including VAT, before additional measured edging or drainage. The £6,000 minimum does not apply to this example. No perimeter, site conditions or extras have been assumed.
Measure extras by length
Pin kerb: £48/lm; block border: £72/lm; granite edging: £96/lm; drainage channel: £180/lm, all including VAT. Retaining walls over 600mm and aluminium edging need separate assessment. Resin overlay pricing is not enabled. The installation deposit is £600 including VAT under agreed terms; no payment or appointment is taken by the calculator.
Driveway investment guide
Plan your outdoor project
An immediate guide including 20% VAT. Resin rates reduce with project size. Your measured proposal confirms the construction, quantities and exclusions.
This guide covers full build-up only. Ask Dan to assess whether your existing base can be retained.
Retaining walls over 600mm: site-assessed and quoted separately.
42 m² · Full build-up
£13,305.60
Including 20% VAT · indicative, not a fixed quotation
- Surface rate including VAT
- £316.80/m²
- Driveway minimum including VAT
- £6,000
- Measured edging
- £0.00
- Measured drainage channel
- £0.00
Included — subject to specification
- Site-specific preparation and supporting pavement
- Specified surface, levels and edge restraint
- Measured drainage and threshold review
- Written scope, assumptions and exclusions
Abnormal ground, utilities, access and drainage discharge may change the proposal. Permeability depends on the complete pavement design. Installation deposit: £600 including VAT, payable only under agreed terms; no payment or booking is taken here.
Before accepting a proposal
Check work limits, preparation, supporting layers, surface specification, drainage, edge details, disposal, access, assumptions and exclusions. A retained base must be assessed rather than assumed from photographs. Commercial surfacing is priced against its individual scope and loading, not these residential guide rates.

