Tarspra

TARSPRA / Guide

Can my existing driveway be overlaid with resin?

Sometimes. National resin franchises often overlay failing bases; we test first. This is the checklist Dan works through on site before recommending a retained-base or full-depth build.

On-site checklist

Six checks before retaining a base.

  1. Check 01

    Movement

    Cracks wider than hairline, rocking slabs or sunken areas suggest the base is moving and should not be retained.

  2. Check 02

    Drainage

    Standing water or pooling shows falls or ground drainage are inadequate; a resin layer won't fix it.

  3. Check 03

    Thresholds

    Adding a layer raises levels. Door, garage and airbrick heights must still allow a safe step and damp-proof clearance.

  4. Check 04

    Edges

    Edges must be restrained. Crumbling or unsupported edges need new kerbs or full rebuild.

  5. Check 05

    Surface condition

    Oil contamination, loose material or failed patches reduce bond and must be removed or repaired.

  6. Check 06

    Base type & depth

    Concrete or tarmac depth and condition are checked at test points; unknown or thin construction is excavated.

Photographs help, but a retained base can only be confirmed in person. Resin overlay pricing is not shown in our calculator; it is quoted after assessment.

Driveway cost guide